Manual

• HP StorageWorks Enterprise Virtual Array 3000/5000 r ead me first.
• HP StorageWorks Enterprise Virtual Array 3000/5000 World Wide Name label,whichis
shipped with the storage system
• The latest HP OpenView Storage Management Server Update, which consists of the management
server update CD and its associated documentation, or the latest Windows Server Update
• You can d etermine the latest update version available by checking the release notes or
contacting your authorized service representative to findouthowtoreceivethelatest
information.
• Additional documentation is available from the following HP web sites:
• h
ttp://www.hp.com/go/eva3000
• http://ww w.hp.com/go/eva5000
Locate these items and keep them handy. You will need them for the procedures in this manual.
Host information
Make a list o
f information for each host computer that will be accessing the storage system. You will need
the follow
ing information for each host:
• TheLANnameofthehost
• A list of World Wide Names of the FC adapters, also called host bus adapters, through which
the host will connect to the fabric or fabrics that provide ac cess to the storage system
• Operatin
gsystemtype
• Available LUN numbers
Setting up a controller pair using the OCP
NOTE:
ThisprocedureshouldbeperformedbyanHPauthorizedservicerepresentative.
Two pieces of data must b e entered during initial setup using the controller OCP:
• World Wide Name (WW N )—Required to complete setup. This procedure should be performed
by an H P authorized service representative.
• Stora ge system password—Optional. A password provides security allowing only specific
instances of HP Command View EVA to access the storage system.
The OCP on either controller can be used to input the WWN and password data. For more information
about the OCP, see "Operator Control Panel" on page 68.
Table 2 lists the p ush button functions when entering the W WN, WWN checksum, and password data.
Table 2 WWN push but ton functions
Button
Function
Selects a WWN or checksum character by scrolling up through the character list one
character at a time. If you select an in correct character, you can use either
or to
select the correct character.
Accepts the current character and selects the next character. If you accept an incorrect
character, you ca n move through all 16 characters, one character at a time, until you
display the incorrect character. You can then change the character.
Selects a WWN or checksum character by scrolling down through the character list one
character at a time. If you select an in correct character, you can use either
or to
the select correct character.
Accepts all the WWN or checksum characters.
26
Enterprise Virtual Array startup