Manual

1.2.en.01 NONCRITICAL condition—High voltage
This condition r
eport indicates that an element voltage is approaching, but has not reached, the high
voltage CRITICAL threshold. Continued operation under these c onditions may result in a C RITICAL
condition. This condition report remains active until the problem is corrected.
To correct this
problem, record all six characters of the condition report, then contact your HP authorized
service representative.
1.2.en.02 C RITICAL condition—High voltage
This condition report indicates that an element voltage has reached the high voltage CRITICAL threshold.
This report remains active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
1.2.en.03 NONCRITICAL condition—Low voltage
This condition report indicates that an element voltage is approaching, but has not reached, the low
voltage CRITI
CAL threshold. Continued operation under these conditions may result in a CRITICAL
condition. This condition report remains active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service repr
esentative.
1.2.en.04 CRITICAL condition—Low voltage
This condition report indicates that an element voltage has reached the low voltage CRITICAL threshold.
This condition report remains active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
1.3.en.01 N
ONCRITICAL condition—High current
This condition report indicates that an element current is approaching, but has not reached, the high
current CRITICAL threshold. Continued operation under these conditions may result in a CRITICAL
condition.
This condition report remains active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
1.3.en.02CRITICALcondition—Highcurrent
This condition report indicates that an element current has reached the high current CRITICAL threshold.
This condition report remains active until the problem is corrected.
To correct this problem, record all six characters of the condition report, then contact your HP authorized
service representative.
Backplane conditions
IMPORTANT:
Backplane N V RAM errors usually occur during manufacture. At this time they are identified and
correcte
d. They rarely occur during normal operation.
The format of a backplane condition report is 8.2.01.ec,where:
• 8.2. is the backplane element type number
130
EMU-generated condition reports