Manual

0.7.01.15 UNREC
OVERABLE condition—EMU hardwa re failure
The EMU has detected an internal hardware problem. This condition report remains active until the
problem is corrected.
Complete the fol
lowi ng procedure to correct this problem:
1. Record all six c
haracters of the condition report.
2. Reset the EMU.
3. Observe the EMU to ensure the error does not recu r within the first minute.
4. If the error do
es recur, contact your HP authorized service representative. The EMU is inoperative
and must be replaced as soon as possible.
0.7.01.16 INFORMATION condition—EMU internal ESI data corrupted
The EMU ESI data is corrupted. This condition does not affect a ny other element and no action is required.
0.7.01.17 UN
RECOVERABLE condition—Power shutdown failure
The power supply did not respond to a controller, EMU, or power supply shut down command. Shutting
down the supply is required to prevent overheating.
Complete the following procedure to corre ct the problem:
1. Record all six characters of the condition report.
2. Move the pow
er cord bail lock 1, Figure 43,totheleft.
3. Disconnec
t the AC power cord 2 from the supply.
CXO7490
A
2
3
1
4
Figure 43 Disconnecting AC power
0.7.01
.18 UNRECOVERABLE condition—EMU hardware failure
The EMU has detected an internal hardware problem. This condition report remains active until the
problem is corrected.
Comple
te the following procedure to correct this problem:
1. Record
all six characters of the condition report.
2. Reset the EMU.
3. Observe the EMU to ensure the error does not recu r within the first minute.
4. If the
error does recur, contact your H P authorized service representative. The EMU is inoperative
and must be replaced as soon as possible.
Enterprise Virtual Array 3000/5000 user guide
127