Manual

NOTE:
Components without an individual product certification label are qualified as part of the next higher
assembly (for example, enclosure, rack, or tower).
Figure 40 Typical enc losure certification label
NOTE:
The certification symbols on the label depend upon the certification level. For example, the FCC Class A
certification symbol is not the same as the FCC Class B certification symbol.
Fibre Channel drive enclosure specifications
This appendix defines the physical, environmental, and power specifications of the Fibre Channel drive
enclosure a
nd the elements.
Physical specifications
This section describes the physical specifications of the drive enclosure and elements.
WARNING!
An assembled enclosure (all elements installed) weighs more than 29.5 kg (65 lb) and requires a
minimum of two individuals to move.
Table 28 defines the dimensions and weights of the enclosure.
Table 28 Drive enclosure physical specifications
NOTE:Metricdimensionsareexpressedinwholenumbers.Forexample,10.795cmisexpressedas108
mm. Millimeter dimensions are always expressed in whole numbers.
Shipping
Empty
Installed
Carton
Carton and pallet
Height
131 mm (5.16
in)
131 mm (5.16 in)
641 mm (25.25 in)
768mm(30.25in)
Width
505 mm
(19.875 in)
505 mm (19.8 75
in)
318 mm (12.5 in)
610 mm (24 in)
Depth
448 mm
(17.625 in)
448 mm (17.625
in)
597 mm (23.5 in)
1016 mm (40 in)
Weight 10.9 kg (24 lb) 30.9 kg (68 lb) 43.6 kg (96 lb) 49 kg (108 lb)
106
Regulatory notices and specifications