Instruction Manual

Figure 1 Direct connect iSCSI-Fibre Channel attachment mode configuration
.
Figure 2 EVA4400 direct connect iSCSI-Fibre Channel attachment mode configuration
.
Figure 3 and Figure 4 illustrate the HP Command View EVA iSCSI deployment configurations. These
configurations are used with EVA 4x00/6x00/8x00 storage systems and allow for HP Command
View connectivity without the need for a Fibre Channel switch. Figure 4 shows a redundant
configuration using two mpx100/100b's.
An EVA4400 with an ABM module can be configured with direct connections as an iSCSI-only
solution. See Figure 5.
EVA iSCSI Connectivity User Guide 23