Instruction Manual

System
The error log messages provided by system modules are listed and described in Table 28.
Table 28 System—error log messages
Description
Message
Number
Log messageID
Failed to kill system task.4Failed to kill sys killer %d\n237572
Reporting router exceeds maximum operating
temperature.
5Temperature over high threshold %d237573
The router temperature has returned to the
normal operating range and is d (C).
6
Temperature is back to normal range
%d
249862
Fatal log messages
The following sections list the fatal log messages by reporting module.
iSCSI driver
The fatal error log messages for iSCSI drivers are listed and described in Table 29. Log messages
beginning with #0 apply to iSCSI port 1 (GE1) and log messages beginning with #1 apply to iSCSI
port 2 (GE2).
Table 29 iSCSI driver—fatal log messages
Description
Message
Number
Log messageID
iSCSI processor SRAM test failed.20
#%d: qlutm_init: Diagnostic failed, inval-
id SRAM
69652
iSCSI processor failed diagnostic reboot.21
#%d: qlutm_init: Diagnostic failed, fail
reboot
69653
iSCSI processor failed NVRAM diagnostic.22
#%d: qlutm_init: Diagnostic failed, inval-
id NVRAM
69654
iSCSI processor failed DRAM diagnostic.23
#%d: qlutm_init: Diagnostic failed, inval-
id DRAM
69655
iSCSI processor failed to return diagnostic
result.
24
#%d: qlutm_init: Failed to return diagnost-
ic result to Bridge
69656
Response queue entry contains invalid
handle.
309
#%d: QLUtmProcessResponseQueue: In-
valid handle %x EntryType %x
69941
Set NVRAM reboot timer failed.319
#%d: QLSetNvram: QLRebootTimer
failed AF %x RS %x Time %d
69951
Port disable reboot timer failed.332
#%d: QLDisable: QLRebootTimer failed
AF %x RS %x Time %d
69964
EVA iSCSI Connectivity User Guide 191