Instruction Manual

Verifying enclosure operation
Check the enclosure status LEDs in the front, lower right corner (see Figure 40). If the display is not
exactly as s hown, an error condition exists. To determine the defective element, check the drive status
LEDs on the fron
t, the EMU, the power supplies, and the blowers,aswellascheckingtheI/Omodule
status LEDs on the rear (see Table 21).
Either of the drive displays in Figure 40 indicates a properly functioning disk.
CXO7958A
Figure 40 T
ypical operational LED status displays—enclosure front
Figure 41 s
hows the location of the status displays. See Table 21 for state descriptions of the status LEDs.
Enterprise Virtual Array 3000/5000 user guide (VCS 3.110)
89