Installation manual

Table Of Contents

Configurations

Sun PROM Monitor Commands

Configurations

Handling Static Sensitive Devices

Electronic components on printed circuit boards can be damaged by static electricity. Always wear a

grounding strap and use an antistatic mat when handling boards or components.

Reference Documentation

Standard Configurations and Standard Options supported by Sun Microsystems are documented in the

End User Price List, Reseller Price List, Hardware Configuration Guides, Product Brochures, and

Hardware Installation Manuals.

Abbreviations

Assy Assembly

FRU Field Replaceable Unit

w With

w/o Without

Dip Switches

Rocker and Slide type DIP Switches are used in Sun products. Turn on a Rocker-type switch by

pressing down the end of the switch furthest from the OPEN lettering on the switch. Turn on a

Slide-type switch by sliding the switch in the direction of the arrow on the switch. Switches 1 and 2

are shown in the ON position in these illustrations.

Sun4/I: Configurations

http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00004/wcd004a1.htm (1 von 5) [25.04.2002 16:24:35]