Installation manual

Jumper Settings
JUMPER PINS SETTING DESCRIPTION
J0301 1-2 In 20MHz clock enable
J0801 1-2
2-3
In
In
Use 4MB parity memory (default)
Disable 4MB parity memory
J1701 1-2 In CPU is installed in VME slot 1
Notes
Boot PROM 1.4 does not support SunOS 4.1e.1.
Boot PROM 1.5 supports SunOS 4.1e.2.
Boot PROM 1.6 supports SunOS 4.1e.3.
Boot PROM 1.6 and EPROM daughter card 500-8013-05 are installed on CPU 501-8035-12.4.
Daughter Card 500-8013-05 is required if a customer supplied PROM is used with the 1.6
EPROM.
5.
A customer supplied EPROM will not function on Daughter Card 500-8013-04, or lower, even
if the 1.6 EPROM is installed.
6.
The fuses are not field replaceable.7.
The final software release for the Sun-4/E is Solaris 2.4.8.
Reference
The SPARCengine 1E CPU Card User's Manual, 800-8137.
Last updated: December 2, 1996
Comments and Suggestions
Sun4/I: CPU - SPARCengine 1 (Sun-4/E)
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd00543.htm (2 von 2) [25.04.2002 16:24:22]