Installation manual

4MB SIMMs, Option X134A, are not supported on the Sun-4/330 CPU.3.
The Sun 4100 1MB SIMM, 501-1466, may be used in the Sun-4/310 and Sun-4/350 system
upgrades.
4.
Fuses F0300, F3100, and F3200 use 2 Amp Fuse 150-1174-01.5.
The CPU is set for Ethernet Level 2. Level 1 is not selectable.6.
CPU >=501-1316-04 is required for use with the ISP-80 and FDDI controllers and with LISP
software.
7.
CPU >=501-1316-03 is required for use with CG5.8.
Boot PROM 3.0 or greater is required to boot from the 60MB 1/4" tape drive in the Mass
Storage Subsystem.
9.
Boot PROM 3.0.1 or greater is required to boot from a tape drive on a second SCSI Host
Adapter.
10.
Boot PROM 3.0.3 or greater is required with 4MB SIMM modules.11.
Install Fused Shunt, 150-1669-01, at locations J2302, J2303, J2502, and J2503, to provide
circuit protection to the M+ (+12Vdc) and M- (-12Vdc) inputs to the UC5170 Serial Port Line
Driver.
12.
The final software release for the Sun 4300 is Solaris 2.4.13.
Reference
Sun 4300 CPU Board Installation Notes, 800-3119.
Last updated: December 2, 1996
Comments and Suggestions
Sun4/I: CPU - Sun 4300
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd00541.htm (3 von 3) [25.04.2002 16:24:08]