Installation manual

1M/4M DRAM
Specifies 1MByte or 4Mbyte DRAM modules.
Jumper Settings
Memory Mapped into the Upper 256MBytes of Type 0 Address Space
BOARD
SIZE
BOARD
ID
HI/LOW
MEM
1/4MB
DRAM
ADDRESS RANGE
J0502 J0503 J0504 J0505 J0506 J0501 PHYSICAL ADDR RANGE
In In Out Out Out Out 0x1000000 - 0x10ffffff
In In Out In Out Out 0x11000000 - 0x11ffffff
In In In Out Out Out 0x12000000 - 0x12ffffff
In In In In Out Out 0x13000000 - 0x13ffffff
Memory Mapped into the Lower 256MBytes of Type 0 Address Space
BOARD
SIZE
BOARD
ID
HI/LOW
MEM
1/4MB
DRAM
ADDRESS RANGE
J0502 J0503 J0504 J0505 J0506 J0501 PHYSICAL ADDR RANGE
In In Out Out In Out 0x0000000 - 0x00ffffff
In In Out In In Out 0x01000000 - 0x01ffffff
In In In Out In Out 0x02000000 - 0x02ffffff
In In In In In Out 0x03000000 - 0x03ffffff
Notes
For specific application dependent memory configurations refer to the SPARCengine 1E ECC
Memory Card User's Manual, 800-8138.
1.
The default configuration for Hi Mem/Low Mem is J0506, OUT.2.
Reference
SPARCengine 1E ECC Memory Card User's Manual, 800-8138.
Last updated: December 2, 1996
Comments and Suggestions
Sun4/I: Memory - Sun-4/E
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd00592.htm (2 von 2) [25.04.2002 16:23:04]