Installation manual

AC Sequencer Power Requirements
300-1011 / 300-1027 / 300-1263
300-1264 / 370-1126 / 370-1155 / 370-1156
Operating Range
Nominal Voltage: 208, 220, 230, or 240 Volts AC
Operating Voltage: Single Phase 180-264 Volts AC
Frequency: 48-63 Hz
Current: 24 A maximum
AC Power Plug
The 230VAC power plug is a NEMA L6-30P. The 240VAC power plug is a Blue, 32A, IEC 309, with
Ground at the 6-hour position.
230V Sequencer AC Power Cord
A 12 AWG Type SJO flexible cord rated at 25A when connected to utilization equipment with 2
current carrying conductors is used. Refer to Article 400-5 of the US National Electrical Code.
NEMA L6-30R / ANSI C73.75 230 Volt Power
Receptacle
Sun4/II: Power - AC Sequencer Power Requirements
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd0069e.htm (1 von 2) [25.04.2002 15:59:07]