Installation manual

Table Of Contents
Notes
There are no jumpers or switches on this board.1.
Set CPU EEPROM location 0x1F to 0x20.2.
Requires SunOS 4.0 CG8 or 4.0.3 or greater.3.
SunOS 4.0 CG8 is not upgradeable to 4.0.1.4.
CG8 must be 501-1374-04 or greater for use with Sun 3400 and Sun 4300 CPU boards.5.
The CG8 is not supported under OpenWindows Versions 2 or 3.6.
Last updated: December 2, 1996
Comments and Suggestions
Sun4/I: Graphics - CG8 24-bit Color Frame Buffer
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd0055c.htm (2 von 2) [25.04.2002 16:21:53]