Installation manual

Table Of Contents
Address Description
The address is set on the J2 Adapter installed in the J2 Auxiliary connector, the Address Select switch
on the External Storage Module, or on Jumpers JP35, JP36, and JP37. Set the address at only one
location.
J2 Adapter Circuitry
External Storage Module
Orient Pin-1 of Address Select Switch Cable 530-1659
with ID4 on the J2 Adapter.
Sun4/I: SCSI Disk - Maxtor XT-8760S (669MB)
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd005e0.htm (2 von 3) [25.04.2002 16:18:00]