Installation manual

SunLink Channel Adapter
Sun-4/260/280/350/360/370/380/390/470/490
SS670MP / SS690MP
370-1128 501-1460
Board Set Board Set
Backpanel and Connectors
Power:
8.6 Amps @ +5Vdc
43.0 Watts
Notes
Replace 370-1128 with 501-1460. Refer to FCO A0003-1.1.
The Sun-3/110 and Sun 3004 CPU must be 501-1134-06, 501-1163-09, 501-1164-09, or
greater. All 501-1208 and 501-1209 revisions are usable.
2.
In Sun-3/2XX systems with multiple SCA boards, the CPU must be 501-1100-08, 501-1206-06,
or greater.
3.
The SunLink Channel Adapter must be >=501-1460-02 for use with the Sun 3400 CPU.4.
The Sun FDDI Board must be >=501-1276-02 for use with the SunLink Channel Adapter.5.
SunLink Release 7.0 Channel Gateway is required for use with the Sun 3400 CPU.6.
The Sun 3400 CPU must be >=501-1550-10 for use with the SunLink Channel Adapter.7.
The Sun 4200 CPU, 501-1274 must be >=501-1274-13 for use with the SunLink Channel
Adapter.
8.
The SunLink Channel Adapter is not supported in Solaris >=2.2.9.
Sun4/I: Communication - SunLink Channel Adapter
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00005/wcd0051d.htm (1 von 5) [25.04.2002 16:15:57]