Installation manual

NS 811-1243 88780-60082 Firmware Kit (not qualified)
NS 811-1243 88780-6018 2 Firmware Kit
1
NS 811-1244 07980-60048 NRZI Speed Sensor
Firmware Kit 88780-60182 includes Drive Controller firmware level 6.76, Buffer firmware
level 6.77, and SCSI firmware level 6.62.
1.
PART # DESCRIPTION
180-1097 5V Power Cord, IEC 320/CEE 22 to NEMA 5-15P
180-1189 230V Power Cord, IEC 320/CEE 22 to NEMA 6-15P
180-1190 240V Power Cord, IEC 320/CEE 22 to Reverse IEC 320
230-1166 Tie Wrap, 5.5"
230-1177 Cable Tie Clip
240-1207 10-32 x 1/2" Screw
250-1018 Rubber Stop Bumper
260-4191 Logo
330-1312 Shipping Bracket, 56" Rack (obsolete)
340-1868 Shipping Bracket, 56" Rack (obsolete)
340-2185 Shipping Bracket, 56" Rack (obsolete)
340-2220 Shipping Bracket, 56" Rack (obsolete)
340-2288 Shipping Bracket, Outer Side, 56" Rack
340-2289 Shipping Bracket, Inner Side, 56" Rack
370-1254 Slide Rails
530-1501 Data Cable, DD-50SA to Centronics, 2.0M
530-1502 Data Cable, Centronics to Centronics, 1.5M,
530-1503 Data Cable, 50-Pin SCSI-2 to Centronics, 2.0M
530-1568 Data Cable, DD-50SA to Centronics, 4.0M
530-1900 Data Cable, 50-Pin SCSI-2 to Centronics, 4.0M
599-1684 115V Tabletop Tape Drive Assembly
599-1685 240V Tabletop Tape Drive Assembly
140-1011 6.0A Fuse, .25x1.25" (115V)
140-1002 3.15A Fuse, 5x20 mm (240V)
150-1407 SCSI Terminator, Centronics
530-1501 Data Cable, DD-50SA to Centronics, 2.0M
540-1821 Tabletop Tape Drive without Fuse and Labels
540-1897 230V Rackmount Tape Drive Assembly
540-1898 240V Rackmount Tape Drive Assembly
140-1002 3.15A Fuse, 5x20 mm (240V)
140-1039 3.0A Fuse, .25x1.25" (230V)
150-1407 SCSI Terminator, Centronics
Sun4/II: Parts - Removable Media Options - Front-Load 1/2" Tape Drive
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd00682.htm (4 von 5) [25.04.2002 16:07:34]