Installation manual

10 811-1235 3110-0178 Cover Hinge
11 811-1231 1390-0776 Cover Latch
12 811-1215 07980-60041 Speed Sensor Assembly
13 811-1218 07980-60052 Takeup Hub Assembly, Plastic
13 811-1218 07980-60152 Takeup Hub Assembly, Aluminum
14 811-1214 07980-60040 EOT/BOT Sensor Assembly
15 811-1216 07980-60045 Arm Buffer Assembly
16 811-1209 07980-21701 Buffer Arm Bearing (Roller Guide)
17 811-1233 1460-2180 Buffer Spring
18 811-1219 07980-60053 Supply Hub Assembly
19 370-1276 07980-66531 Read/Write/Format Board
20 370-1277 07980-66503 Drive Controller Board
21 370-1279 07980-66514 Data Buffer Board, 512KB Buffer
3
21 370-1279 07980-66534 Data Buffer Board, 1MB Buffer
3
22 811-1232 1420-0314 3V Lithium Battery
3
23 811-1211 07980-60000 Mother Board PCA
24 811-1212 07980-60008 Display (Front Panel PCA)
The latch release swings out to the right.1.
The latch release pulls straight out.2.
The battery is not replaceable on Data Buffer Boards manufactured after approximately January
1990.
3.
Sun4/II: Parts - Removable Media Options - Front-Load 1/2" Tape Drive
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd00682.htm (2 von 5) [25.04.2002 16:07:34]