Installation manual

Miscellaneous
Board Hardware
PART # DESCRIPTION
130-0272 2-Pin Shunt, 0.10" Pin Spacing, 0.025" Pin Diameter
130-2190 2-Pin Shunt, 2.0 mm Pin Spacing, 0.50 mm Pin Diameter
240-1287 Hex Screw, M2.5 0.45 x 16 mm
240-1288 Hex Screw, M2.5 0.45 x 10 mm
340-1407 Air Restrictor, 9U Cardcage
340-1818 Rear Panel, MG4 Analog/ECL Frame Buffer
540-1433 Single Slot Filler Panel, 9U Cardcage
540-1809
150-1192
240-1426
240-1571
330-1099
340-1601
340-1602
340-1605
340-1611
Rear Panel Assembly, P4 Video, Sun 4300/4400 CPU
Tape (required, not included)
M3 Nut
#4-40 Jackscrew
Insulator (required, not included)
Filler Panel, 9-Pin Connector
Filler Panel, 25-Pin Connector
BNC Filler Panel, Internal
BNC Filler Panel, External
330-1099 P4 Video Insulator, Sun 4300/4400 CPU
150-1192 Tape, P4 Video Insulator, Sun 4300/4400 CPU
560-1183
330-1100
Spring Finger Insulation Kit
Insulator Shield
150-1022 Lithium Battery, 3.0Vdc
150-1164 Silver Oxide Battery, 1.55Vdc
150-1022 Lithium Battery, 3.0Vdc
Last updated: December 2, 1996
Comments and Suggestions
Sun4/II: Parts - Board - Miscellaneous - Board Hardware
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd00618.htm [25.04.2002 16:06:40]