Installation manual

Configuration 7 xx
3
Paper matrix 8 xx
4
Console Type 9 xx
4
Processing Direction controls the top and bottom page margin. Each increment from 0 to F
adjusts the margin 0.5 mm.
1.
Scanning Direction controls the left and right page margin. Each increment from 0 to 8 adjusts
the margin 0.5 mm.
2.
Press ENTER to print one test page.3.
Do NOT change these factory settings.4.
SPARCprinter Error Codes
RAP DESCRIPTION
C3
C5
C9
No paper tray is detected.
The paper tray is empty.
A paper tray print was requested when there is paper in the manual feed tray.
E1
E4
E5
A paper jam at the infeed roller has occurred.
A paper jam at the outfeed roller has occurred.
The top cover is open.
J2
J3
J4
J5
No drum cartridge is detected.
No toner cartridge is detected.
The drum cartridge has reached end of life.
The toner cartridge is empty.
P1 The fuser has shut down
U1
U2
U4
The main motor speed dropped below normal during a print cycle.
Laser Failure
Fuser Failure
Last updated: December 2, 1996
Comments and Suggestions
Sun4/II: Parts - Printer - SPARCprinter
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd00677.htm (4 von 4) [25.04.2002 16:03:12]