Installation manual

SPARCprinter
Option SPRN-400
Xerox 4030
PART # DESCRIPTION
365-1089 SPARCprinter (115V & 240V)
365-1124 Toner Cartridge
1
365-1125 Drum Cartridge
2
365-1126 Universal Paper Tray
365-1127 B4 Paper Tray
370-1365 Video Port Cable, Video Port to SPARCprinter
410-1017 Reusable Field Service Transit Case
501-1540 SBus Printer Board
530-1680 Parallel Port Cable
530-1683 Loopback Test Cable, Parallel Port to Video Port
530-1694 Test Cable, Video Port to Video Port
811-1345 Front Cover
811-1316 Corotron Assembly
811-1687 Fuser Wick 94E95090 (available from SunExpress)
The life of the Toner Cartridge is 8000 pages. A J5 error code indicates a low toner condition.
Reset the display when a new Toner Cartridge is installed.
a. Turn the AC power OFF.
b. Replace the Toner Cartridge.
c. Turn the AC power ON.
d. Press the Reset button located next to the power switch.
1.
The life of the Drum Cartridge is 20,000 pages. Reset the print counter when a new Drum
Cartridge is installed.
a. Turn the AC power OFF.
b. Install a new Drum Cartridge.
b. Press and hold the Reset button located next to the power switch.
c. Turn the AC power ON.
d. Release the Reset button.
2.
Do not reset the print counter unless a new Drum Cartridge is installed. Resetting the print
counter without replacing the Drum Cartridge causes mechanical damage to the SPARCprinter when
the toner sump fills.
SPARCprinter Operator Panel
Sun4/II: Parts - Printer - SPARCprinter
http://lios.apana.org.au/~cdewick/sunshack/data/feh/1.4/wcd00006/wcd00677.htm (1 von 4) [25.04.2002 16:03:12]