User's Manual

Energy saver feature
The monitors support a reduced power state. The reduced power state will be initiated if the monitor detects
the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the absence of
these signals, the monitor screen is blanked, the backlight is turned o, and the power light turns amber.
When the monitor is in the reduced power state, the monitor will utilize 0.3 watts of power. There is a brief
warm-up period before the monitor will return to its normal operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called power
management features).
NOTE: The energy saver feature only works when the monitor is connected to a computer that has energy
saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to initiate the
reduced power state at a predetermined time. When the monitor's Energy Saver utility causes the monitor to
initiate the reduced power state, the power light turns amber.
Energy saver feature 25