User's Manual

Setting up the monitor
Installing the monitor stand
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
1. Position the monitor facedown on a at surface covered by a soft clean cloth.
2. Slide the stand’s base (1) into the bottom of the stand’s arm, and then tighten the screw (2) on the
underside of the base. Then attach the top of the stand’s arm (3) to the connector on the back of the
monitor head. The stand’s arm will click into place.
6 Chapter 1 Getting started