Spec sheet

QuickSpecs
HP EliteOne 1000 G1 All-in-One Business PC
Technical Specifications
Not all configuration components are available in all regions/countries.
c05622409 — DA 16042 - Worldwide — Version 5 — October 19, 2017
Page 42
• 1 2.5" internal bay supporting up to Two 2.5" hard drives (HDD/SSD/SED/SSHD)
• 1 5.25" external supporting optical drive
Spare parts are available throughout the warranty period and or for up to “5” years after the end of
production.
Batteries
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater the1ppm by weight
Cadmium greater than 20ppm by weight
Battery size: CR2032 (coin cell)
Battery type: Lithium
Additional Information
 This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive
- 2011/65/EC.
 This HP product is designed to comply with the Waste Electrical and Electronic Equipment
(WEEE) Directive – 2002/96/EC.
 This product is in compliance with California Proposition 65 (State of California; Safe
Drinking Water and Toxic Enforcement Act of 1986).
 This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold level, see
www.epeat.net
 Plastics parts weighing over 25 grams used in the product are marked per ISO11469 and
ISO1043.
 This product contains 36.1% post-consumer recycled plastic (by wt.)
 This product is 96.3% recycle-able when properly disposed of at end of life.
Packaging Materials
External:
PAPER/Corrugated
2072 g
Internal:
PLASTIC/EPS (Expanded Polyethylene)
756 g
PLASTIC/Polyethylene low density
70 g
The plastic packaging material contains at least 100% recycled content.
The corrugated paper packaging materials contains at least 80% recycled content.
Material Usage
This product does not contain any of the following substances in excess of regulatory limits (refer to
the HP General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf):
 Asbestos
 Certain Azo Colorants
 Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
 Cadmium
 Chlorinated Hydrocarbons
 Chlorinated Paraffins
 Formaldehyde
 Halogenated Diphenyl Methanes
 Lead carbonates and sulfates
 Lead and Lead compounds
 Mercuric Oxide Batteries
 Nickel – finishes must not be used on the external surface designed to be frequently
handled or carried by the user.
 Ozone Depleting Substances
 Polybrominated Biphenyls (PBBs)
 Polybrominated Biphenyl Ethers (PBBEs)
 Polybrominated Biphenyl Oxides (PBBOs)