User Manual

Front panel controls
Control Function
Function buttons (1–4) Use these buttons to navigate through the OSD based on the indicators next to the
buttons that are activated while the OSD is open.
NOTE: To activate the Function buttons, press any of the buttons so that the button
labels appear on the right side of the screen and the button LEDs are lit.
1 Menu button Opens the OSD menu, selects a menu item from the OSD, or closes the OSD menu.
2 Viewing Modes button
Assignable Function button 1
Navigates through the Viewing Modes menu and selects a preset view mode.
3 Information button
Assignable Function button 2
Opens the Information menu.
4 Next Active Input button
Assignable Function button 3
Navigates through the OSD menu and selects a video input source.
5 Power button Turns the monitor on or o.
NOTE: Be sure the master power switch on the rear of the monitor is in the ON position
to turn on the display.
Reassigning the function buttons
You can change the three assignable Function buttons from their default values so that when the buttons are
activated you can quickly access commonly used menu items. You can not reassign the Menu button.
To recongure Function buttons:
1. Press one of the four rear panel Function buttons to activate the buttons, and then press the Menu
button to open the OSD.
2. In the OSD menu, select Menu Control, select Assign Buttons, and then select one of the available
options for the button you want to reassign.
NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at
http://www.hp.com/go/sml.
Product features and components 3