User Manual

Main Menu Description
Color Control Selects and adjusts the screen color.
Input Control Selects the video input signal.
Image Control Adjusts the screen image.
PIP Control Selects and adjusts the PIP image.
Power Control Adjusts the power settings.
Menu Control Adjusts the OSD controls.
Management Adjusts the DDC/CI settings and returns all OSD menu settings to the factory default settings.
Information Selects and displays important information about the monitor.
Exit Exits the OSD menu screen.
Using Picture-in-Picture (PIP) and Picture-beside-Picture (PBP)
The monitor supports both PIP, where one source is overlaid on another, and PBP, where one source is
positioned adjacent to another either horizontally (for landscape orientation) or vertically (for portrait
orientation). Two full high denition (FHD) images can be displayed in the PIP mode.
To use PIP or PBP:
1. Connect a secondary input source to the monitor.
2. Press one of the four Function buttons on the rear panel to activate the buttons, and then press the
Menu button to open the OSD.
3. In the OSD, select PIP Control and then select Enable PIP.
4. The monitor will scan the secondary inputs for a valid signal input and use that input for the PIP/PBP
picture. If you want to change the PIP/PBP input, select PIP Control in the OSD, and then select Assign
Inputs.
5. If you want to change the size of the PIP, select PIP Size in the OSD, and then select the desired size.
6. If you want to adjust the position of the PIP, select PIP Position in the OSD, and then select the desired
position.
Adjusting Low Blue Light Mode
Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating
image while reading content on the screen.
To adjust the blue light output from the monitor:
1. Press one of the four rear panel Function buttons to activate the buttons, and then press the Menu
button to open the OSD. Select Color Control and Viewing Mode.
2. Select your desired setting:
16 Chapter 2 Using the monitor