User Manual

Attaching the monitor to a mounting device
1. Remove the monitor stand. Refer to Removing the monitor stand on page 13.
2. Remove the four screws from the VESA holes located on the rear of the monitor head.
3. Use the four screws removed from the VESA holes on rear of the monitor head to attach the mounting
device to the monitor.
IMPORTANT: Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
IMPORTANT: For optimal monitor performance and screen clarity, do not rotate the monitor 90
degrees to portrait orientation.
HP watermark and image retention policy
The IPS display models are designed with IPS (In-Plane Switching) display technology which provides ultra-
wide viewing angles and advanced image quality. IPS displays are suitable for a wide variety of advanced
image quality applications. This panel technology, however, is not suitable for applications that exhibit static,
stationary or xed images for long periods of time without the use of screen savers. These types of
applications may include camera surveillance, video games, marketing logos, and templates that are
displayed on the screen for a prolonged period of time. Static images may cause image retention damage that
could look like stains or watermarks on the display's screen.
Displays in use for 24 hours per day that result in image retention damage are not covered under the HP
warranty. To avoid image retention damage, always turn o the display when it is not in use or use the power
management setting, if supported on your system, to turn o the display when the system is idle.
14 Chapter 1 Getting Started