User Manual
● For a USB Hub:
Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a
USB Type-A port on the source device.
● For DisplayPort Alt-mode:
Connect the Type-C end of a USB cable to a USB Type-C port on the monitor and the other end to a
USB Type-C port on the source device.
NOTE: To set the video input source to USB-C, press the Menu button on the monitor’s rear panel,
select Input Control, and then select USB-C Conguration.
● Select 3840 × 2160 @ 60 Hz + USB 2.0 for a higher vertical refresh rate and a lower USB speed.
–or–
● Select 3840 × 2160 @ 30 Hz + USB 3.0 for a lower vertical refresh rate and a higher USB speed.
8 Chapter 1 Getting Started