User Manual
Setting up the monitor
Use caution when setting up the monitor
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the panel may
cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will not recover
to its normal condition.
If installing a stand, position the monitor facedown on a at surface covered with protective sheet foam or a
nonabrasive cloth. This prevents the screen from getting scratched, defaced, or broken and prevents damage
to the control buttons.
Attaching the monitor stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
TIP: Consider the placement of the monitor, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Lift the monitor from its box and place it facedown on a at surface covered by protective sheet foam or
a nonabrasive cloth.
2. Slide the top of the stand's mounting plate (1) under the upper lip of the recess in the back of the
monitor.
3. Lower the bottom of the stand's mounting plate (2) into the recess until it snaps into place.
Setting up the monitor 5