User Manual
5 Remote management
The display provides three dierent methods for remote management:
● Web dashboard: Network-based one-to-one command and control
● WS-Management: IT-level network-based one-to-many manageability using SOAP protocols
● USB API: Host-based one-to-one command and control
The WS-Management and USB API remote management methods are documented in separate documents
and are available on the optical disc provided with the display and on www.hp.com. This document provides
information on the web dashboard.
The web dashboard requires an Ethernet connection to the display. Before setting up remote management,
be sure to connect an Ethernet cable with network connectivity to the display.
Conguring remote management
The remote management conguration is set using the Remote management server options in the
Management menu.
Turning remote management on
Remote management is disabled by default and must be turned on before being used. The internal processor
must also be turned on.
To turn on the processor and remote management:
1. Press one of the front bezel buttons to display the button labels, and then press the Open Menu button
to open the OSD.
2. Select Management, and then select Internal processor.
3. Select Enable to turn the processor on.
4. Select Back to return to the Management menu.
5. Select Remote management services.
6. Select Enable/disable server.
7. Select Enable to turn the remote management server on.
8. Press the Exit button to close the OSD.
Checking and setting the display’s IP address
When remote management services are turned on and the display is connected to the network, the display
will request an IP address from the network’s DHCP server. You can conrm that an IP address is assigned via
the Information menu.
Open the Display info menu by pressing one of the ve bezel buttons to display the button labels. Then press
the Display Info button to open the Information menu. The IP address is shown at the bottom of the menu. If
you do not see an IP address, check the network cabling to ensure that the display is connected to the
network.
Conguring remote management 89