User Manual
<studiocal>
<validate_flag value="TRUE"/>
<validation_pattern entries="8">
<valid_rgb r="255" g="255" b="255"/>
<valid_rgb r="0" g="0" b="0"/>
<valid_rgb r="255" g="0" b="0"/>
<valid_rgb r="0" g="255" b="0"/>
<valid_rgb r="0" g="0" b="255"/>
<valid_rgb r="0" g="255" b="255"/>
<valid_rgb r="255" g="0" b="255"/>
<valid_rgb r="255" g="255" b="0"/>
</validation_pattern>
<calibration entries="1">
<calibration_info>
<preset num="3" name="BT.709" store="user"/>
<gamma value="bt1886"/>
<target_primaries rx="0.640" ry="0.330" gx="0.300" gy="0.600"
bx="0.150" by="0.060" wx="0.3127" wy="0.329" wY="80"
external="FALSE"/>
</calibration_info>
</calibration>
</studiocal>
Validation results le
When validation is enabled, a text le is created containing all measurements made during calibration. The
lename includes the display serial number and a unique three-digit number. The le is broken into multiple
parts, with header lines prexed with # for each section. Unless otherwise noted, if the section contains
measurements the RGB triplets (in 8-bit RGB) and the measurement data (in CIE XYZ) for each pattern is
listed.
The following le sections are included:
● #Calibration Equipment: List of measurement instruments used for the calibration.
● #MEAS_NUM: The number of measurements made when characterizing the display.
● #MEAS_DATA: The measurements taken to characterize the display.
● #PRESET NAME: The name assigned to the preset.
● #VALID RGB or #Color Checker: Denes whether user-supplied patterns or X-Rite Color Checker
patterns were used for validation. Following this header are the RGB triplet and post-calibration
measurement data for each pattern.
78 Chapter 4 Using the StudioCal XML schema