User Manual

Level 1 Level 2 Level 3 Level 4
support 4K at a 60Hz refresh rate
and USB 3.0.
4096×2160 60 Hz + USB 2.0 data
4096×2160 30 Hz + USB 3.0 data
Back
USB functionality in sleep How do you want the display USB
ports to behave when the display
sleeps? If you disable USB hubs
during sleep, you will save power,
but all devices attached will
disconnect from the host when
the display sleeps. If you want
USB devices to stay connected
when the display goes to sleep,
enable this option.
Enable USB ports during sleep
Disable USB ports during sleep
Back
Internal processor Do you want the internal
processor to be enabled? The
internal processor must be
enabled for display calibration,
rmware updates, and remote
management.
Enable
Disable
Back
Date and time settings [Date]
[Time]
Set date and time automatically
Change date and time Time widget (xx : XX AM/PM)
Use 12-hour time
Use 24-hour time
Date widget (Month / Day /
Year)
Back
Set time zone [Lists all valid time zones]
Automatically adjust for daylight
saving time
Back
Calibration conguration Enable calibration
Allow use of external
instrument
52 Chapter 2 Using the display