User Manual

Level 1 Level 2 Level 3 Level 4
Auto EDID update Do you want the display to
automatically update the EDID
when you switch color spaces?
Enable
Disable
Back
Hot-plug initiate Do you want the display to
initiate a Hot-Plug Event when
you switch color spaces?
Enable
Disable
Back
DisplayPort Hot-Plug detection Do you want DisplayPort
connections to switch to low
power mode when the display
sleeps or remain active so the
display can respond to
communication from the host?
Low power
Always active
Back
DisplayPort compatibility Not all displays can sync to a
DisplayPort 1.2 connection. Do
you want DisplayPort input 1 to
identify itself as version 1.1 to
connected displays?
DisplayPort 1.2
DisplayPort 1.1 compatibility
mode
Back
DisplayPort EDID conguration Depending on your graphics card
driver revision, not all display
modes may be available to you
without switching to a CEA-861
EDID conguration. Do you want
to use a Display ID or CEA-861
EDID? Please note that under
CEA-861 mode, the default timing
will be 3840×2160 due to
CEA-861 limitations.
Display ID (4096×2160 default
timing)
CEA-861 (3840×2160 default
timing)
Back
USB Type-C conguration How do you want to congure
your USB Type-C connection? USB
Type-C cannot simultaneously
Navigating the on-screen display menus 51