User Manual

Pixel-for-pixel
This option is for source video that has a lower resolution than the display’s native resolution of 2560×1440
and you wish to view the image without any scaling applied. If enabled, this option will display the source
input in its native size and ll the remainder of the frame with 0% black.
The following illustration shows the visual result when a 2048×1080 source input is displayed on the display
with the pixel-for-pixel option enabled.
Using the “Fill To” options
To change the way the source video is displayed on-screen:
1. Press any Function button on the front bezel.
2. Press the Open Menu button to open the OSD.
3. Select Image adjustment to display the adjustment options screen.
4. Select Image scaling to show the display options.
5. Use the Up/Down buttons to navigate to the desired open option. Then press the Select button to select
it.
NOTE: The Image scaling menu can be reassigned to a bezel Function button for easy access. Refer to
Changing the bezel function buttons on page 37 for instructions on assigning the bezel Function button.
Understanding image adjustment options 25