User Manual

the active inputs, then the display will indicate the highest ranking priority input. You can select the input
source in the OSD. Press one of the front bezel buttons to activate the buttons, and then press the Open Menu
button to open the OSD. In the OSD select Video Input and choose the desired input source.
IMPORTANT: USB-C input must be manually selected for a video input. Once USB-C is selected for the video
input, auto-scanning of the HDMI and DisplayPort inputs is disabled.
HP watermark and image retention policy
The IPS display models are designed with IPS (In-Plane Switching) display technology which provides ultra-
wide viewing angles and advanced image quality. IPS displays are suitable for a wide variety of advanced
image quality applications. This panel technology, however, is not suitable for applications that exhibit static,
stationary or
xed images for long periods of time without the use of screen savers. These types of
applications may include camera surveillance, video games, marketing logos, and templates that are
displayed on the screen for a prolonged period of time. Static images may cause image retention damage that
could look like stains or watermarks on the display's screen.
Displays in use for 24 hours per day that result in image retention damage are not covered under the HP
warranty. To avoid image retention damage, always turn o the display when it is not in use or use the power
management setting, if supported on your system, to turn o the display when the system is idle.
Connecting USB devices
There are four downstream USB ports on the display (two on the rear and two on the side).
NOTE: You must connect the USB hub cable (USB Type-B or USB Type-C) from the display to the computer to
enable the USB ports on the display.
Setting up the display 15