User Manual

Rear and side components
Component Function
1 Master power switch Turns o all power to the display.
NOTE: Putting the switch in the O position yields the lowest
power state for the display when it is not in use.
2 AC power connector Connects the AC power cord to the display.
3 HDMI1 Connects an HDMI cable to the display.
4 HDMI2 Connects an HDMI cable to the display.
5 DisplayPort 1 Connects a DisplayPort cable to the display.
6 DisplayPort 2 Connects a DisplayPort cable to the display.
7 Analog audio out Connects headphones to the display.
8 KVM keyboard port Connects a keyboard to the display.
9 RJ-45 connector Connects a network cable to the display.
10 DreamColor USB ports (2) Connect a measurement instrument or a USB ash drive for
color calibration or rmware update.
11 USB Type-C upstream port
(for host connections)
Connects a host device with a Type-C connector.
12 USB 3.0 upstream port Connects the USB hub cable to the display's USB hub connector
and to a host USB port/hub.
13 USB 3.0 downstream ports
(2)
Connect optional USB devices to the display.
14 USB 3.0 downstream ports
(side panel) (2)
Connect optional USB devices to the display.
4 Chapter 1 Getting Started