User Manual

3. Select the appropriate user from the list, and then enter the user’s password.
If you did not create users during setup, the Admin user is available.
4. If desired, select Keep me signed in to prevent the dashboard from timing out and logging you out.
5. Click Sign In to log in to the dashboard.
Navigating the dashboard
After you log in, the Home page of the dashboard provides display information, including asset and current
conguration information.
The Go to menu allows you to navigate to dierent display conguration pages.
To navigate to a settings page:
1. Click the Go to menu, and then congure the desired settings.
2. Click the Go button to display the desired settings.
Each settings page contains all of the options found in the OSD menu, rearranged for ease of access.
These settings use tabs to break the options into logical sections.
The Markers tab allows you to import StudioCal XML les into the display. The Import Marker button allows
you to navigate to the location of the XML le on your local drives and import it on the display. You can also
directly import StudioCal XML les for calibration automation, user presets, and so on. Navigate to the
relevant conguration page to access these import options.
You can also move between dierent setting groups by clicking on them on the left half of the screen.
Navigating between the dierent dashboard sections
The Go to menu provides access to the dierent options within the Monitor Settings section. There are two
additional sections available:
● Home: The section displayed when you rst log into the display.
● Monitor Prole: Provides access to the display details elds you entered when you rst logged into the
display.
To switch between the dashboard sections:
1. Click the DreamColor Remote Access menu, located at the upper left of the dashboard, to display the
section menu.
2. Select the desired section.
Logging out of the dashboard
If you are not logged out when you close the dashboard, you can manually log out of the dashboard session.
To log out of the dashboard:
1. Click the user icon in the upper-right corner of the dashboard to display the user menu.
2. Click Logout to log out of the dashboard.
3. Close the browser window to disconnect from the display.
92 Chapter 5 Remote management