User's Manual

1. Connect one end of the HDMI cable to the HDMI port on the Chromebox.
2. Connect the other end of the cable to the high-denition TV or monitor. You now see the Chrome
desktop on your display device.
Connect to a wireless network
Enabling and disabling Wake on LAN (WOL) function
Wake on LAN (WOL) is a function that allows your device to be turned on by a message sent across your local
area network, or LAN.
NOTE: Wake on LAN only functions when a LAN cable is attached. WOL resets to its default setting (WOL-
enabled) after a system restart.
Accessing the WOL function requires initiating a recovery and entering developer mode. Be sure that all of
your les are saved to the cloud or to an external drive before proceeding.
Turn WOL on or o
To turn this function on or o:
NOTE: Changes to Wake on LAN functions may be applied only when a LAN cable is attached. WOL will be
reset to its default setting (WOL-enabled) after a system reboot. For further information and updates, go to
http://www.hp.com/support, and select your country. Follow the on-screen instructions to nd
documentation relevant to your device.
1. You must enter development mode to alter WOL settings. See http://www.chromium.org/chromium-os/
developer-information-for-chrome-os-devices for directions about accessing developer mode on your
device. The process for enabling and disabling WOL may change as the operating system is updated.
2. After initiating developer mode, the system restarts automatically, and you are prompted to set up your
language and keyboard again and sign into your user account.
3. After you sign in, you see the Chrome desktop. From here, press ctrl + alt + f2 or ctrl + alt + → to enter
console mode.
4. On the console screen, type root and press enter.
Connect to a wireless network 7