User's Manual

2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from
TV and radio reception, orient the circuitry end of the cable toward the computer.
Using HP LAN-Wireless Protection (select products only)
In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from
unauthorized wireless access. When HP LAN-Wireless Protection is enabled, the WLAN (Wi-Fi) or WWAN
connection is turned o when the computer is connected directly to a LAN.
To turn on and customize HP LAN-Wireless Protection:
1. Start Computer Setup (BIOS).
● Computers or tablets with keyboards:
▲ Turn on or restart the computer, and before the HP logo appears, press f10 to enter Computer
Setup.
● Tablets without keyboards:
▲ Turn on or restart the tablet, and then quickly hold down the volume down button until the
Startup menu is displayed. Tap f10 to enter Computer Setup.
2. Select Advanced, and then select Built-in Device Options.
3. Select the check box for LAN/WLAN Auto Switching, LAN/WWAN Auto Switching, or both to turn o
WLAN connections, WWAN connections, or both when connected to a LAN network.
4. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then
select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Your changes take eect when the computer restarts.
Using HP MAC Address Pass Through (select products only)
MAC Address Pass Through provides a customizable way of identifying your computer and its communications
on networks. This system MAC address provides unique identication even when your computer is connected
through a network adapter. This address is enabled by default.
ENWW Using HP MAC Address Pass Through (select products only) 25