User Guide SUMMARY This guide provides information about components, network connection, power management, security, backing up, and more.
© Copyright 2020 HP Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, Pentium, and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Safety warning notice Reduce the possibility of heat-related injuries or of overheating the computer by following the practices described. WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice ENWW
Processor configuration setting (select products only) Important information about processor configurations. IMPORTANT: Select computer products are configured with an Intel® Pentium® N35xx/N37xx series or a Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart.
vi Processor configuration setting (select products only) ENWW
Table of contents 1 Getting started ............................................................................................................................................. 1 Finding information ............................................................................................................................................... 1 2 Components ..................................................................................................................................................
Using Bluetooth wireless devices (select products only) ................................................................. 23 Connecting Bluetooth devices ........................................................................................ 23 Using NFC to share information (select products only) .................................................................... 23 Connecting to a wired network ..............................................................................................................
Connecting displays to computers with Intel graphics (with an optional hub) ............. 35 Connecting displays to computers with Intel graphics (with a built-in hub) ................. 36 Discovering and connecting to Miracast-compatible wireless displays (select products only) ...... 36 Discovering and connecting to Intel WiDi certified displays (select Intel products only) ................ 37 Connecting to Intel WiDi certified displays .....................................................................
Using DriveLock Security Options ..................................................................................................... 51 Selecting Automatic DriveLock (select products only) ................................................... 51 Enabling Automatic DriveLock ..................................................................... 51 Disabling Automatic DriveLock .................................................................... 52 Entering an Automatic DriveLock password .....................
Changing the computer boot order ................................................................................................... 66 Using HP Sure Recover (select products only) .................................................................................. 67 10 Computer Setup (BIOS), TPM, and HP Sure Start ........................................................................................... 69 Using Computer Setup ................................................................................
Specifications ............................................................................................................................................ 79 Input power .......................................................................................................................................................... 79 Operating environment .......................................................................................................................................
1 Getting started This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer and where to find additional HP resources. TIP: To quickly return to the computer Start screen from an open app or the Windows desktop, press the Windows key on your keyboard. Pressing the Windows key again returns you to the previous screen.
Table 1-1 Additional information (continued) Resource Contents Select the question mark icon in the taskbar search box. Then select Support. Safety & Comfort Guide To access this guide: ▲ Type HP Documentation in the taskbar search box, and then select HP Documentation.
2 Components Your computer features top-rated components. This chapter provides details about your components, where they are located, and how they work. Locating hardware Use these instructions to find out what hardware is installed on your computer. ▲ Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer.
Table 2-1 Right-side components and their descriptions (continued) Component Description ▲ Press in on the card, and then remove it from the memory card reader. (2) HDMI port Connects an optional video or audio device, such as a highdefinition television, any compatible digital or audio component, or a high-speed High Definition Multimedia Interface (HDMI) device. (3) Dual-Mode DisplayPort™ connector Connects an optional digital display device, such as a highperformance monitor or projector.
Table 2-2 Left-side components and their descriptions Component (1) (2) Description RJ-45 (network) jack/status lights Security cable slot Connects a network cable. ● Green (left): The network is connected. ● Amber (right): Activity is occurring on the network. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it might not prevent the computer from being mishandled or stolen.
Table 2-3 Display components and their descriptions Component Description (1) WWAN antennas (select products only)* Send and receive wireless signals to communicate with wireless wide area networks (WWANs). (2) WLAN antennas (select products only)* Send and receive wireless signals to communicate with wireless local area networks (WLANs). (3) Camera light(s) (select products only) On: One or more cameras are in use.
Table 2-3 Display components and their descriptions (continued) Component ▲ Description Type HP Documentation in the taskbar search box, and then select HP Documentation. Keyboard area Keyboards can vary by language. Touchpad The touchpad settings and components are described here. Touchpad settings You learn how to adjust the touchpad settings and components here. Adjusting touchpad settings Use these steps to adjust touchpad settings and gestures. 1.
Table 2-4 Touchpad components and their descriptions Component Description (1) Pointing stick Moves the pointer on the screen. (2) Center pointing stick button Functions like the center button on an external mouse. (3) Left pointstick button Functions like the left button on an external mouse. (4) Touchpad zone Reads your finger gestures to move the pointer or activate items on the screen. NOTE: For more information, see Using touchpad and touch screen gestures on page 27.
Table 2-5 Lights and their descriptions Component Description (1) Caps lock light On: Caps lock is on, which switches the key input to all capital letters. (2) Fn lock light On: The fn key is locked. For more information, see Hot keys on page 13. (3) Privacy key light (select products only) On: Privacy screen is on, which helps prevent side-angle viewing. (4) Mute light ● On: Computer sound is off. ● Off: Computer sound is on. ● On: Microphone is off. ● Off: Microphone is on.
Table 2-6 Button, speakers, and fingerprint reader and their descriptions Component Description (1) Speakers Produce sound. (2) Power button ● When the computer is off, press the button briefly to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep (select products only). ● When the computer is in Hibernation, press the button briefly to exit Hibernation.
Special keys Use the illustration and table to identify the special keys. NOTE: Your computer might look slightly different from the following illustration. Table 2-7 Special keys and their descriptions Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Executes frequently used system functions when pressed in combination with another key. Such key combinations are called hot keys. See Hot keys on page 13.
Table 2-7 Special keys and their descriptions (continued) Component Description To learn more about your power settings, see your power options. ▲ Right-click the Power meter icon and then select Power Options. (6) num lk key Turns the embedded numeric keypad on and off. (7) Integrated numeric keypad A separate keypad to the right of the alphabet keyboard. When num lk is pressed, the integrated keypad can be used like an external numeric keypad.
Table 2-8 Action keys and their descriptions (continued) Icon Description Mutes or restores speaker sound. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes the microphone. Turns the keyboard backlight off or on. On select products, you can adjust the brightness of the keyboard backlight. Press the key repeatedly to adjust the brightness from high (when you first start up the computer), to low, to off.
Table 2-9 Hot keys and their descriptions (continued) Key Description S Sends a programing query. W Pauses the operation. Bottom Use the illustration and table to identify the bottom components. Table 2-10 Bottom components and their descriptions Component (1) Description Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.
Table 2-11 Top cover component and its description Component Description Internal microphone (select products only) Records sound. Rear Use the illustration and table to identify the rear components. Table 2-12 Rear component and its description Component Description Vents Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.
● Service label—Provides important information to identify your computer. When contacting support, you might be asked for the serial number, the product number, or the model number. Locate this information before you contact support. Your service label will resemble one of these examples. Refer to the illustration that most closely matches the service label on your computer.
Table 2-15 Service label components Component (1) HP product name (2) Product ID (3) Serial number (4) Warranty period ● Regulatory label(s)—Provide(s) regulatory information about the computer. ● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Inserting a SIM card (select products only) Use these instructions to insert a SIM card.
6. Remove the service door, and then remove the battery. For steps on removing the service door and battery, see Removing a user-replaceable battery on page 43.
7. Slide the SIM tray cover to the right (1), open the cover (2), and then insert the SIM card into the SIM tray (3). NOTE: The SIM card in your computer might look slightly different from the illustration in this section. NOTE: To properly insert the SIM card, match the angled edge of the card with the triangle on the tray. 8. Close the SIM tray cover (1) and slide it to the left (2). To remove the SIM card, reverse the procedures as described above.
20 Chapter 2 Components ENWW
3 Network connections Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites by using your computer and a wired or wireless network connection. This chapter helps you get connected to that world. Connecting to a wireless network Your computer might be equipped with one or more wireless devices.
Connecting to a WLAN Before you can connect to a WLAN with this procedure, you must first set up internet access. NOTE: When you are setting up internet access in your home, you must establish an account with an internet service provider (ISP). To purchase internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the internet service. 1. Be sure that the WLAN device is on. 2.
Broadband information that is included with your computer or the mobile network operator might provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. Using GPS (select products only) Your computer might be equipped with a Global Positioning System (GPS) device.
1. 2. Confirm that the NFC function is enabled. ● Type wireless in the taskbar search box, and then select Turn wireless devices on or off. ● Confirm that the selection for NFC is On. Tap the NFC tapping area with an NFC-enabled device. You might hear a sound when the devices connect. NOTE: To find the location of the antenna on the other NFC device, see your device instructions. 3. Follow any on-screen instructions to continue.
2. Plug the other end of the network cable into a network wall jack (2) or router. NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the computer. Using HP LAN-Wireless Protection (select products only) In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from unauthorized wireless access.
To customize MAC Address Pass Through: 1. Start Computer Setup (BIOS). ● Computers or tablets with keyboards: ▲ ● Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: ▲ Turn on or restart the tablet, and then quickly hold down the volume down button until the Startup menu is displayed. Tap f10 to enter Computer Setup. 2. Select Advanced, and then select MAC Address Pass Through. 3.
4 Navigating the screen Depending on your computer model, you can navigate the computer screen using one or more methods. ● Use touch gestures directly on the computer screen. ● Use touch gestures on the touchpad. ● Use an optional mouse or keyboard (purchased separately). ● Use an on-screen keyboard. ● Use a pointing stick. Using touchpad and touch screen gestures The touchpad helps you navigate the computer screen and control the pointer using simple touch gestures.
Two-finger slide (touchpad and precision touchpad) Place two fingers slightly apart on the touchpad zone and then drag them up, down, left, or right to move up, down, or sideways on a page or image. Two-finger tap (touchpad and precision touchpad) Tap two fingers on the touchpad zone to open the options menu for the selected object. NOTE: The two-finger tap performs the same function as right-clicking with a mouse.
Four-finger tap (touchpad and precision touchpad) By default, the four-finger tap opens the Action Center. Tap four fingers on the touchpad zone to perform the gesture. To change the function of this gesture on a precision touchpad, select Start, select Settings, select Devices, and then select Touchpad. Under Four-finger gestures, in the Taps box, select a gesture setting. Three-finger swipe (touchpad and precision touchpad) By default, the three-finger swipe switches between open apps and the desktop.
One-finger slide (touch screen) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. ● To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. ● To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using an optional keyboard or mouse An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as you do using touch gestures.
5 Entertainment features Use your HP computer for business or pleasure to meet with others via the camera, mix audio and video, or connect external devices like a projector, monitor, TV, or speakers. See Components on page 3 to locate the audio, video and camera features on your computer. Using a camera (select products only) Your computer has one or more cameras that enable you to connect with others for work or play. Most cameras allow you to video chat, record video, and record still images.
You can connect wired headphones to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Connecting headsets You can connect a headset to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. A stand-alone microphone can be plugged into a USB port. See your manufacturer's instructions.
IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information about using your video features, refer to HP Support Assistant. Connecting a Thunderbolt device using a USB Type-C cable To see video or high-resolution display output on an external Thunderbolt device, follow these steps.
Connecting a high-definition TV or monitor using HDMI To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the instructions. NOTE: 1. To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. Connect one end of the HDMI cable to the HDMI port on the computer. NOTE: HDMI port shape can vary by product. 2. Connect the other end of the cable to the high-definition TV or monitor. 3.
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Select Set Default, and then select OK. Turning off HDMI audio Use these instructions to return the audio stream to the computer speakers. 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2.
1. Connect an external hub (purchased separately) to the DisplayPort connector on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power. 2. Connect your external display devices to the VGA port or DisplayPort connectors on the hub. 3. When Windows detects a monitor connected to the DisplayPort hub, the DisplayPort Topology Notification dialog box is displayed. Select the appropriate options to configure your displays.
Discovering and connecting to Intel WiDi certified displays (select Intel products only) Use Intel WiDi to wirelessly project individual files such as photos, music, or videos, or to duplicate your entire computer screen to a TV or a secondary display device. Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display device; provides for full-screen duplication; and improves speed, quality, and scaling.
2. 38 Connect the other end of the cable to the external device.
6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power and an external power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Some power management features described in this chapter might not be available on your computer. Using Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation.
IMPORTANT: If you have set a password to be required on exiting Sleep, you must enter your Windows password before your work returns to the screen. Initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. Right-click the Power icon , and then select Power Options. 2. In the left pane, select Choose what the power buttons do (wording might vary by product). 3.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press ctrl+alt+delete, select the Power icon, and then select Shut down. ● Press and hold the power button for at least 4 seconds. ● If your computer has a user-replaceable battery (select products only), disconnect the computer from external power, and then remove the battery.
Select the question mark icon in the taskbar. 2. Select Troubleshooting and fixes, and then in the Diagnostics section, select HP Battery Check. If HP Battery Check indicates that your battery should be replaced, contact support.
Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation When the battery level is low and you cannot bring the computer out of Hibernation, connect the AC adapter. 1. Connect the AC adapter to the computer and to external power. 2. Exit Hibernation by pressing the power button.
5. Slide the battery release latches (1) to release the battery. NOTE: The battery release latches automatically return to their original position. 6. Remove the battery (2) from the computer. Storing a user-replaceable battery Check your stored battery every 6 months. If the capacity is less than 50%, recharge the battery before returning it to storage. IMPORTANT: To reduce the risk of damage to a battery, do not expose it to high temperatures for extended periods of time.
WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. WARNING! Do not charge the computer battery while you are aboard aircraft.
46 Chapter 6 Managing power ENWW
7 Security Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, Computer Setup (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. NOTE: Some security features listed in this chapter might not be available on your computer.
Using passwords A password is a group of characters that you choose to secure your computer information. You can set several types of passwords, depending on how you want to control access to your information. You can set passwords in Windows or in Computer Setup, which is preinstalled on the computer. ● BIOS administrator, power-on, and DriveLock passwords are set in Computer Setup and are managed by the system BIOS. ● Windows passwords are set only in the Windows operating system.
Table 7-3 Types of Computer Setup passwords and their functions (continued) Password Function NOTE: If features have been enabled to prevent removing the BIOS administrator password, you may not be able to remove it until those features have been disabled. Power-on password ● Must be entered each time you turn on or restart the computer. ● If you forget your power-on password, you cannot turn on or restart the computer.
1. Start Computer Setup. ● Computers or tablets with keyboards: ▲ ● Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: ▲ Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. Enter your current BIOS administrator password. 3.
Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same keys that you used to set the password), and then press enter. After two unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. Using DriveLock Security Options DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied only to the internal hard drives of the computer.
Disabling Automatic DriveLock To disable Automatic DriveLock, follow these steps. 1. Start Computer Setup. ● ● Computers or tablets with keyboards: 1. Turn off the computer. 2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: 1. Turn off the tablet. 2. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2.
● The DriveLock user password and the DriveLock master password can be identical. Setting a DriveLock master password To set a DriveLock master password, follow these steps. 1. Start Computer Setup. ● ● Computers or tablets with keyboards: 1. Turn off the computer. 2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: 1. Turn off the tablet. 2.
4. Select Enable DriveLock and then press enter. 5. Carefully read the warning. 6. Follow the on-screen instructions to set a DriveLock user password and enable DriveLock. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE: If you are using arrow keys to highlight your choice, you must then press enter. Disabling DriveLock To disable DriveLock, follow these steps. 1. Start Computer Setup.
4. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. 5. Select the hard drive you want to manage, and then press enter. 6. Make the selection for the DriveLock password that you want to change, and then follow the on-screen instructions to enter passwords. NOTE: The Change DriveLock Master Password option is visible only if the DriveLock master password was provided at the DriveLock Password prompt in step 3. 7.
Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program that you install on your computer, network, or both, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider: ● Host-based firewalls—Software that protects only the computer it is installed on.
HP DaaS helps protect devices against malware and other attacks, monitors device health, and helps reduce time spent solving device and security issues. You can quickly download and install the software, which is highly cost-effective relative to traditional in-house solutions. For more information, go to https://www.hptouchpointmanager.
58 Chapter 7 Security ENWW
8 Maintenance Performing regular maintenance keeps your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup.
Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive in a primary hard drive bay, the secondary hard drive bay (select products only), or both are parked. Updating programs and drivers HP recommends that you update your programs and drivers regularly. Updates can resolve issues and provide new features and options. For example, older graphics components might not work well with the most recent gaming software.
1. Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the surfaces. 2. Turn off your device and unplug the power cord and other connected external devices. Remove any installed batteries from items such as wireless keyboards. CAUTION: To prevent electric shock or damage to components, never clean a product while it is turned on or plugged in. 3. Moisten a microfiber cloth with water. The cloth should be moist, but not dripping wet. IMPORTANT: 4.
IMPORTANT: 4. To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels. Wipe the exterior of the product gently with the moistened cloth. IMPORTANT: Keep liquids away from the product. Avoid getting moisture in any openings. If liquid makes its way inside your HP product, it can cause damage to the product. Do not spray liquids directly on the product. Do not use aerosol sprays, solvents, abrasives, or cleaners containing hydrogen peroxide or bleach that might damage the finish. 5.
IMPORTANT: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. ● If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you can use your computer. In-flight computer use is at the discretion of the airline.
64 Chapter 8 Maintenance ENWW
9 Backing up, restoring, and recovering This chapter provides information about processes that are standard procedure for most products. ● Backing up your personal information—You can use Windows tools to back up your personal information (see Using Windows tools on page 65). ● Creating a restore point—You can use Windows tools to create a restore point (see Using Windows tools on page 65).
NOTE: If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. Restoring and recovery You have several options for recovering your system. Choose the method that best matches your situation and level of expertise. NOTE: Not all methods are available on all products.
Using HP Sure Recover (select products only) Select computer models are configured with HP Sure Recover, a PC OS recovery solution built into the hardware and firmware. HP Sure Recover can fully restore the HP OS image without installed recovery software.
68 Chapter 9 Backing up, restoring, and recovering ENWW
10 Computer Setup (BIOS), TPM, and HP Sure Start HP provides several tools to help set up and protect your computer. Using Computer Setup Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as hard drives, display, keyboard, mouse, and printer). Computer Setup includes settings for types of devices installed, the startup sequence of the computer, and amount of system and extended memory.
1. Start Computer Setup. See Using Computer Setup on page 69. 2. Select Main, select Apply Factory Defaults and Exit, and then select Yes. NOTE: If you are using arrow keys to highlight your choice, you must then press enter. NOTE: On select products, the selections might display Restore Defaults instead of Apply Factory Defaults and Exit. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings.
1. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Select the question mark icon in the taskbar. 2. Select Updates, and then select Check for updates and messages. 3. Follow the on-screen instructions. 4. At the download area, follow these steps: a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. Make a note of the date, name, or other identifier.
IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable. For any compliance issues arising from your operation or usage of TPM that violates the previously mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities.
11 Using HP PC Hardware Diagnostics The HP PC Hardware Diagnostics utility allows you to run diagnostics tests to determine whether your computer hardware is running properly. The three versions are HP PC Hardware Diagnostics Windows, HP PC Hardware Diagnostics UEFI (Unified Extensible Firmware Interface), and (for select products only) a firmware feature called Remote HP PC Hardware Diagnostics UEFI.
Accessing HP PC Hardware Diagnostics Windows from Support Assistant After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Support Assistant. To access HP PC Hardware Diagnostics Windows from HP Support Assistant: 1. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Select the question mark icon in the taskbar. 2. Select Troubleshooting and fixes. 3. Select Diagnostics, and then select HP PC Hardware Diagnostics Windows.
1. Go to http://www.hp.com/support. 2. Select Software and Drivers, select your type of product, and then enter the product name or number in the search box that is displayed. 3. In the Diagnostics section, select Download, and then follow the on-screen instructions to select the specific Windows diagnostics version to be downloaded to your computer or USB flash drive. The tool downloads to the selected location.
a. Connected USB flash drive NOTE: To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see Downloading the latest HP PC Hardware Diagnostics UEFI version on page 76. 3. b. Hard drive c. BIOS When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run, and then follow the on-screen instructions.
Downloading Remote HP PC Hardware Diagnostics UEFI HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server. Downloading the latest Remote HP PC Hardware Diagnostics UEFI version You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive. 1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. 2. Select Download Remote Diagnostics, and then select Run.
78 Chapter 11 Using HP PC Hardware Diagnostics ENWW
12 Specifications When you travel with or store your computer, the input power ratings and operating specifications provide helpful information. Input power The power information in this section might be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100 V–240 V, 50 Hz–60 Hz.
Operating environment Use the operating specifications for helpful information when you travel with or store your computer. Table 12-2 Operating environment specifications Factor Metric U.S.
13 Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
82 Chapter 13 Electrostatic discharge ENWW
14 Accessibility HP's goal is to design, produce, and market products, services, and information that everyone everywhere can use, either on a stand-alone basis or with appropriate third party assistive technology (AT) devices or applications. HP and accessibility Because HP works to weave diversity, inclusion, and work/life into the fabric of the company, it is reflected in everything HP does.
International Association of Accessibility Professionals (IAAP) IAAP is a not-for-profit association focused on advancing the accessibility profession through networking, education, and certification. The objective is to help accessibility professionals develop and advance their careers and to better enable organizations to integrate accessibility into their products and infrastructure. As a founding member, HP joined to participate with other organizations to advance the field of accessibility.
Additional links to external partners and suppliers that may provide additional assistance: ● Microsoft Accessibility information (Windows 7, Windows 8, Windows 10, Microsoft Office) ● Google Products accessibility information (Android, Chrome, Google Apps) ● Assistive Technologies sorted by impairment type ● Assistive Technology Industry Association (ATIA) Standards and legislation Countries worldwide are enacting regulations to improve access to products and services for persons with disabilities.
Legislation and regulations Accessibility of IT and information has become an area of increasing legislative importance. These links provide information about key legislation, regulations, and standards. ● United States ● Canada ● Europe ● Australia ● Worldwide Useful accessibility resources and links These organizations, institutions, and resources might be good sources of information about disabilities and age-related limitations. NOTE: This is not an exhaustive list.
Other disability resources Many resources, including these examples, provide information about disabilities and age-related limitations. ● ADA (Americans with Disabilities Act) Technical Assistance Program ● ILO Global Business and Disability network ● EnableMart ● European Disability Forum ● Job Accommodation Network ● Microsoft Enable HP links These HP-specific links provide information that relates to disabilities and age-related limitations.
88 Chapter 14 Accessibility ENWW
Index A accessibility 83 accessibility needs assessment 84 action keys 12 identifying 12 insert 12 keyboard backlight 12 mute 12 privacy screen 12 programable key 12 screen brightness 12 speaker volume 12 switch screen image 12 touchpad 11 using 12 wireless 12 administrator password 48 airplane mode key 21 ambient light sensor, identifying 5 antivirus software 55 assistive technology (AT) finding 84 purpose 83 AT (assistive technology) finding 84 purpose 83 audio 31 adjusting volume 12 HDMI 34, 35 headphone
entering 54 setting 53 DriveLock Security Options 51 Dual-Mode DisplayPort, identifying 3 E electrostatic discharge 81 esc key, identifying 11 external power, using 44 F fingerprint reader 57 fingerprint reader, identifying 9 fingerprints, registering 55 firewall software 56 fn key, identifying 11 fn lock light, identifying 8 four-finger swipe touchpad gesture 29 four-finger tap touchpad gesture 29 G gesture 29 GPS 23 H hardware, locating 3 HDMI audio, configuring 34, 35 HDMI port connecting 33, 34 HDMI por
P passwords administrator 48 BIOS administrator 49, 50, 51 user 48 pointing stick buttons identifying 7 pointing stick, identifying 7 ports Dual-Mode DisplayPort 3 HDMI 3, 33, 34 USB SuperSpeed 4 USB SuperSpeed port with HP Sleep and Charge 4 USB Type-C 37 USB Type-C Thunderbolt 33 USB Type-C Thunderbolt port with HP Sleep and Charge 3 power battery 41 external 44 power button, identifying 9 power connector identifying 3 power icon, using 41 power lights 8 power settings, using 41 precision touchpad using 2
turning off the computer 40 two-finger pinch zoom touchpad and touch screen gesture 27 two-finger slide touchpad gesture 28 two-finger tap touchpad gesture 28 U unresponsive system 40 updating programs and drivers 60 USB SuperSpeed port with HP Sleep and Charge, identifying 4 USB SuperSpeed port, identifying 4 USB Type-C port, connecting 33, 37 USB Type-C Thunderbolt port with HP Sleep and Charge, identifying 3 user password 48 user-replaceable battery 43 using passwords 48 using the keyboard and optional m
