Manual

4
English
Manual Setup
For ink bottles with screw-cap:
Twist open the cap.
For ink bottles with ip-cap:
Twist open the cap and remove the seal.
Replace the cap. Flip open the top of the cap.
1. Open the ink access door and tank covers.
2. Open the cap of the ink tank to be lled.
3. Place the opened bottle upside down on the tank.
The screw-cap bottle will click into place.
Let the ink drain into the tank.
4. Close the bottle cap, tank cap, and tank cover.
Repeat the above steps as needed to ll
other tanks.
5. When tanks are lled, close the ink access door
securely and wait for approximately 15 seconds.
Make sure to close the ink access door
so the printer can detect ink,
before you install printheads.
Note: If there is leftover ink, keep the bottle upright
in a cool and dry place.
1 Open the ink bottles
Fill the ink tanks
2
15
1
2
3
4
5