- Hewlett-Packard IP Console Switch User Guide
Table Of Contents
- HP IP Console Switch User Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Overview
- Chapter 2: Installing the IP Console Switch
- Chapter 3: Expansion Module
- Chapter 4: Interface Adapters
- Chapter 5: Cascade Console Switches
- Chapter 6: Local Port Operation
- Viewing and Selecting Ports and Servers
- Soft Switching
- Using Basic OSD Navigation
- Configuring the OSD Setup Menu
- Assigning Server Names
- Assigning Device Types
- Changing the Display Behavior
- Controlling the Status Flag
- Broadcasting to Servers
- Setting up a Scan Pattern
- Setting Local Console Switch Security
- Managing Server Tasks Using the OSD
- Viewing and Disconnecting User Connections
- Running System Diagnostics
- Resetting the PS/2 Mouse
- Displaying Version Information
- Chapter 7: Upgrading Firmware using TFTP
- Chapter 8: Troubleshooting
- Appendix A: Regulatory Compliance Notices
- Appendix B: Electrostatic Discharge
- Appendix C: Power Cord Set Requirements
- Index
Upgrading Firmware using TFTP
7-2 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:11 PM
Enabling TFTP for Windows 2000 and Windows XP
To enable TFTP for Windows 2000 and Windows XP:
1. Unzip W2K_TFTP3.3.ZIP into an empty directory.
2. From the Start menu, select Settings, Control Panel.
3. Double-click Add/Remove Programs.
4. Click Add New Programs, CD or Floppy. Follow the on-screen instructions in
the Install Program From Floppy Disk or CD-ROM Wizard.
5. In the Open box on the Run Installation Program page, enter the path to the
location of the extracted files.
6. From the EqmTFTPS Setup page, click Install.
7. Click Finish.
8. From the Add/Remove Program page, click Close.