- Hewlett-Packard IP Console Switch User Guide

Local Port Operation
HP IP Console Switch User Guide 6-29
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:17 PM
3. Enter the number of minutes for Inactivity Time (1 to 99) to delay activation of
the screen saver.
4. Select Energy if your monitor is Energy Star compliant. Otherwise,
select Screen.
CAUTION: Monitor damage can result from the use of energy mode with
monitors not compliant with Energy Star.
5. (Optional) Click Test to activate the screen saver test, which lasts 10 seconds,
then returns you to the Security dialog box.
6. Click OK.
NOTE: After activation of the screen saver mode disconnects the user from a server, no
server is selected. The status flag displays Free.
Exiting Screen Saver Mode
To exit the screen saver mode, press any key or move the mouse. The Main dialog
box is displayed.
Deactivating the Screen Saver
To activating the screen saver:
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.
To immediately activate the screen saver, press the Print Scrn key, then press the
Pause key. This command only works when the user is connected to a server.