- Hewlett-Packard IP Console Switch User Guide

Local Port Operation
6-28 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:17 PM
Logging on to Switch
To log on to the IP Console Switch:
1. Press any key on the keyboard, or move the mouse. The Password dialog box is
displayed. Enter the password, then click OK.
2. Press the Print Scrn key.
Removing Password Protection
To remove the password protection from the IP Console Switch:
1. From the Main dialog box, click Setup, Security. The Password dialog box is
displayed. Enter the password, then click OK.
2. In the Security dialog box, click the New field and press the Enter key.
-or-
Double-click the New field, leave the New field blank, and press the Enter key.
3. Click the Repeat field and press the Enter key.
-or-
Double-click the Repeat field, leave the Repeat field blank, and press the
Enter key.
4. Click OK if you want to eliminate the password.
Enabling Screen Saver Mode without Password Protection
To enable the screen saver mode without password protection:
1. If your console switch does not require a password to gain access to the Security
dialog box, proceed to step 2.
-or-
If your console switch is password protected, see the previous procedure, then go
to step 2.
2. Select Enable Screen Saver.