- Hewlett-Packard IP Console Switch User Guide

Local Port Operation
6-24 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:17 PM
Adding Servers to the Scan List
To add servers to the Scan list:
1. The Scan dialog box contains a list of all the servers attached to your unit. Click
the checkbox next to the servers you want to scan.
-or-
Double-click a server name or port.
-or-
Press the Alt key plus the number of the server you want to scan. You can select
up to 16 servers.
2. In the Scan Time box, enter the number of seconds (from 3 to 99) before the
scan moves to the next server in the sequence.
3. Click OK.
NOTE: If the user removes a server from the Device Modify dialog box later, the change
can affect a custom scan pattern.
Removing Servers from the Scan List
To remove a server from the Scan list:
1. In the Scan dialog box, click the server to be removed.
-or-
Double-click a server name or port.
-or-
Click Clear to remove all servers from the scan list.
2. Click OK.