- Hewlett-Packard IP Console Switch User Guide
Table Of Contents
- HP IP Console Switch User Guide
- Notice
- Contents
- About This Guide
- Chapter 1: Overview
- Chapter 2: Installing the IP Console Switch
- Chapter 3: Expansion Module
- Chapter 4: Interface Adapters
- Chapter 5: Cascade Console Switches
- Chapter 6: Local Port Operation
- Viewing and Selecting Ports and Servers
- Soft Switching
- Using Basic OSD Navigation
- Configuring the OSD Setup Menu
- Assigning Server Names
- Assigning Device Types
- Changing the Display Behavior
- Controlling the Status Flag
- Broadcasting to Servers
- Setting up a Scan Pattern
- Setting Local Console Switch Security
- Managing Server Tasks Using the OSD
- Viewing and Disconnecting User Connections
- Running System Diagnostics
- Resetting the PS/2 Mouse
- Displaying Version Information
- Chapter 7: Upgrading Firmware using TFTP
- Chapter 8: Troubleshooting
- Appendix A: Regulatory Compliance Notices
- Appendix B: Electrostatic Discharge
- Appendix C: Power Cord Set Requirements
- Index
Upgrading Firmware using TFTP
HP IP Console Switch User Guide 7-7
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: h-ch7 TFTP Downloads.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:11 PM
5. Configure the terminal emulation software for the server, such as HyperTerminal
for Windows operating systems or Minicom for Linux operating systems.
To configure HyperTerminal:
a. From the desktop screen, click Start, Programs, Accessories,
Communications, HyperTerminal. The Connection Description window
is displayed.
b. Enter a name for the description, and click OK. The Connect To window
is displayed.
c. Select the Communication Port that is connected to the KVM switch
through a serial cable, then click OK. The COM1 Properties window
is displayed.
d. Select 9600 for the Bits Per Second, 8 for Data Bits, None for Parity, 1 for
Stop Bits, and None for Flow Control, then click OK. The HyperTerminal
auto-connects to the console switch.
e. Press the Enter key to access the console switch option menu.