Reference Guide

System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language (or press f2) Change the Computer Setup language.
Boot Options
Set an f9, f10, and f12 delay when starting up.
Enable/disable CD-ROM boot.
Enable/disable floppy boot.
Enable/disable internal network adapter boot.
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
Set the boot order.
Device Configurations
Swap the functions of the fn key and left ctrl key.
Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
Use of a USB keyboard in Computer Setup even
when a Windows operating system is not running.
Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
Built-In Device Options
Enable/disable embedded WLAN Device Radio.
Network Interface Controller (LAN)
LAN/WAN switching
Enable/disable Wake on LAN.
Enable/disable the optical disc drive.
Port Options
Enable/disable the USB port.
Enable/disable the PC Card slot.
Enable/disable flash media reader.
Computer Setup menus 95