Operation Manual

Docking and undocking problems and solutions
Problem Possible cause Solution
The connect button on the docking
station will not slide to secure the
computer.
An optional security cable is connected
to the wrong security cable slot.
Disconnect the security cable.
The computer is turned on and properly
docked, but the power light is not on.
The power cord is not plugged into either
the docking station or the AC outlet.
Properly plug in the power cord.
The computer will not disconnect from
the docking station.
The connectors may be jammed. Slide the connect button all the way in
and then slide it all the way out. If the
computer does not disconnect, repeat
this procedure.
CAUTION: Applying excessive force
may damage connector pins.
An optional security cable is connected. Disconnect the security cable.
ENWW Docking and undocking problems and solutions 13