User Guide

3. Select the operating system, Windows Vista or Vista 64-bit, if an operating system selection
page opens.
4. Select HP My Display and follow the instructions to download and install the software
(sp38944.exe or later).
If the errors continue after installing HP My Display software or the HP My Display update is unavailable,
disable Auto Pivot when viewing movies as follows:
1. Open HP My Display software.
2. Click the Options tab, select Auto Pivot from the left navigation pane, and remove the selection
from Enable Auto Pivot.
Figure : Enable Auto Pivot selection
3. Close the HP My Display window and view the movie.
4. Repeat these steps to re-enable Auto Pivot.
HP and Compaq Desktop PCs - Black Border around Screen
when Connecting through DVI or HDMI
This document applies to desktop computers that have a DVI or HDMI connector.
When you connect your monitor to the computer using a DVI or connector, the display might appear
under-scanned, showing a black border around the image.
To fill the screen with the image, you need to disable the under-scan setting in NVIDIA Control Panel or
change the scaling options in ATI Catalyst Control Center, depending on the graphics card on your