User Guide

4. Click Setup.
5. Click OK.
The window automatically closes when the installation is complete. Use the next section
"Manually selecting a monitor driver in Windows 98, Me, and X," to complete monitor setup.
Manually selecting an older CRT monitor in Windows 98, Me, and XP
Complete the following steps to add an older HP monitor to Windows 98, Me or XP:
1. Open Device Manager:
1. In Windows XP, Right-click the My Computer icon from the Start menu in Windows XP.
In Windows 98 and Me, right-click the My Computer icon on the desktop,
2. Select Properties from the menu.
3. In Windows XP, click the Hardware tab. Then click the Device Manager button.
In Windows 98 and Me, click the Device Manager tab.
2. Click the plus (+) sign next to Monitors.
3. Right-click the monitor listed under Monitors and click Properties. If more than one monitor is
listed, delete them all, one at a time, and restart the computer. Repeat Step 1 through 3,
opening Device Manager each time.
4. Click the Driver tab, and then click Update Driver.
5. Select Install from a list or specific location or Specify the location of the driver. Click Next.
6. Select Don't search... or ... or Display a list, and then click Next
7. Select your monitor name in the selection window.
8. Click Next, and then click Finish.
If your monitor name does not display in the list, continue to the next step.
9. In Windows XP, remove the check from Show compatible hardware.
In Windows 98 and Me, select Show all hardware.
10. Click Hewlett-Packard from the list of manufacturers. Then click your monitor name in the
model list. Click Next.