User Guide

If you have a driver disc, select Browse my computer for driver software.
note:
If you are using a non-HP monitor and it came with software, install the driver that came with
your monitor.
A window with a Browse button opens.
0. Click Let me pick from a list of device drivers on my computer.
An Install From Disk window opens.
1. Insert the disc into the removable media drive.
2. Type the drive letter in the Copy manufacturer's files from field.
3. Click the Browse button.
4. In the Local File window, double-click the folder name that contains the monitor driver.
5. Click the Open button.
7. Click Next, and then click Finish to change the driver.
The monitor driver is installed.
Using HP monitors on a Mac
HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA
modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the
Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the
HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment.
Download and install monitor definitions for older CRT monitors in Windows 95, 98, Me, and XP
Use the following steps to download and install monitor files that were originally produced for CRT
monitors designed to work with Windows 95 and 98:
1. To download the software, click the following link: HP Monitorh.exe download.
The file download window displays.
Figure : File Download window